Upfitter Relay Box

Upfitter Relay Box









Removal and Installation

1. Remove the upfitter switch assembly. For additional information, refer to Upfitter Switch Upfitter Switch.

2. Remove the instrument panel steering column opening cover.

3. Disconnect the 14A303 harness from the 14401 harness in-line connector.

4. Remove the ground terminal screw and position the 14A303 harness ground terminal aside.
- To install, tighten to 12 Nm (106 lb-in).

5. Remove the 2 screws and the upfitter relay box and harness assembly.
- To install, tighten to 4 Nm (35 lb-in).

6. To install, reverse the removal procedure.