LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2010 >> F 150 4WD V8-6.2L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Service and Repair >> Procedures >> Connecting Rod Bend

Connecting Rod Bend




Connecting Rod Bend





NOTE: Refer to the appropriate engine system for the specification.

1. Using the Feeler Gauge Set, measure the connecting rod bend on a suitable alignment fixture. Follow the instructions of the fixture manufacturer. Verify the bend measurement is within specification.





scientia non olet · About LEMON Manuals