Pinpoint Test B: The Shift Control Is Out Of Correct Gear Relationship

External Controls - Column Shift

Pinpoint Tests


PINPOINT TEST B: THE SHIFT CONTROL IS OUT OF CORRECT GEAR RELATIONSHIP

-------------------------------------------------
B1 CHECK THE SHIFT CONTROL LINKAGE


- Apply the brake pedal.
- Gain access to the column shift control linkage.
- Position the selector lever in all ranges.
- Observe all linkages during operation.
- Is the linkage damaged?

Yes
INSTALL a new column shift control linkage. TEST the system for normal operation.

No
GO to B2.

-------------------------------------------------
B2 CHECK THE SELECTOR LEVER CABLE


- Check selector lever cable and bracket for installation and tightness.
- Is the selector lever cable correctly installed and adjusted?

Yes
VERIFY the selector lever cable adjustment. REFER to Selector Lever Cable Adjustment - Column Shift Selector Lever Cable Adjustment - Column Shift. ADJUST the selector lever cable if necessary. GO to B3 .

No
REPAIR as necessary. TEST the system for normal operation.

-------------------------------------------------
B3 CHECK THE LINKAGE/CABLE FOR CORRECT GEAR RELATIONSHIP


- Apply the brake pedal.
- Position the selector lever in all ranges.
- Does the indicator match the gear selection?

Yes
System OK. TEST the system for normal operation.

No
REFER to Instrument Panel, Gauges and Warning Indicators.

-------------------------------------------------