Without Scan Tool

Clear A/T DTCs Procedures
1. Connect the HDS to the DLC (A).





2. Turn the ignition switch ON (II).
3. Clear the DTC(s) on the HDS screen.

PCM Reset
This command clears stored specific data from the PCM such as DTCs freeze data, and readiness codes. It does not clear CKP PATTERN data.
1. Reset the PCM with the HDS when the engine is stopped.
2. Turn the ignition switch OFF.
3. Turn the ignition switch ON (II), and wait for 30 seconds.
4. Turn the ignition switch OFF, and disconnect the HDS from the DLC.
5. Do the PCM idle learn procedure.