Shift Lever Arm
This article is updated by TSB (Technical Service Bulletin) 06-40-001 dated January 2006.
Description:
The shift knob lever removal procedure provided in the 2006 Azera Shop Manual is incorrect. In the shop manual, what appears to be a shift knob that is threaded onto the shift lever is actually held in place by a C-clip. Attempting to remove the shift knob by twisting the knob counter-clockwise to unthread it may result in damage to the shift knob. The correct removal procedure is provided in this bulletin.
Removal
Shift Lever Knob:
1. Remove the shift lever knob (A). Shift Lever Knob
Indicator Assembly:
2. Remove the indicator assembly (A).
Console Box:
3. Remove the two bolts (A) in the console box.
Floor Air Duct:
4. Remove the two screws (A) mounting floor air duct.
Interlock Connector:
5. Disconnect the interlock connector (A).
Control Cable:
6. Disconnect the control cable (A).
Shift Lever Assembly:
7. Remove the shift lever assembly (A).
(Bolts: 4EA)
Installation
1. Installation is the reverse of removal.