P181E

P181E STEERING ANGLE SENSOR





DTC Logic

DTC DETECTION LOGIC






DTC CONFIRMATION PROCEDURE
1.DTC REPRODUCTION PROCEDURE
With CONSULT-III
1. Turn the ignition switch OFF to ON.
2. Perform self-diagnosis for "ALL MODE AWD/4WD".
Is DTC "P181E" detected?
YES - Proceed to diagnosis procedure. SEE Diagnosis Procedure.
NO - INSPECTION END




Diagnosis Procedure
1.PERFORM ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT) SELF-DIAGNOSIS
With CONSULT-III
Perform self-diagnosis for "ABS".
Is DTC "C1143" detected?
YES - Proceed to diagnosis procedure. C1143.
NO - GO TO 2.
2.CHECK CAN COMMUNICATION LINE
Check communication line. CAN.
Is inspection result normal?
YES - Replace transfer control unit. Service and Repair.
NO - Repair or replace error-detected parts.