Side Camera Finisher Assembly

OUTSIDE MIRROR


SIDE CAMERA FINISHER ASSEMBLY : Removal and Installation


Disassembly
1. Remove door mirror assembly from front door panel. Removal And Installation.
2. Remove glass mirror. Glass Mirror.
3. Remove door mirror cover. Door Mirror Cover.





4. Remove side camera finisher (1) fixing screw (A).





5. Disconnect harness connector (B), and remove screws (C) and pawl (D) fixing the side camera finisher (1) to housing.





6. Remove side turn signal lamp fixing screws (E) and remove side turn signal lamp.

NOTE:
Pull slightly side camera finisher (1) covering side turn signal lamp bottom screw.
7. Remove side camera finisher assembly.
8. Remove around view camera. Service and Repair.

Assembly
Assemble in the reverse order of disassembly.