Tilt Motor

TILT MOTOR

Description

- The tilt motor is installed to the steering column assembly.
- The tilt motor is activated with the automatic drive positioner control unit.
- The steering column is tilted upward/downward by changing the rotation direction of tilt motor.


Component Function Check


1. CHECK FUNCTION

1.Select "TILT MOTOR" in "ACTIVE TEST" mode with CONSULT.
2.Check the tilt motor operation.





Is the operation of relevant parts normal?
YES- Inspection End.
NO- Perform diagnosis procedure. Refer to "Diagnosis Procedure" .


Diagnosis Procedure

Regarding Wiring Diagram information, refer to "Wiring Diagram" [1][2]Electrical Diagrams.

1. CHECK TILT MOTOR POWER SUPPLY

1.Turn ignition switch OFF.
2.Disconnect tilt motor.
3.Turn the ignition switch ON.
4.Perform "ACTIVE TEST" ("TILT MOTOR") with CONSULT.
5.Check voltage between tilt motor harness connector and ground.





Is the inspection result normal?
YES- Replace tilt motor. Refer to "Exploded View" Exploded View.
NO- GO TO 2.

2. CHECK TILT MOTOR CIRCUIT

1.Turn ignition switch OFF.
2.Disconnect automatic drive positioner control unit.
3.Check continuity between automatic drive positioner control unit harness connector and tilt motor harness connector.
Revision: March 20122013 Infiniti JX





4.Check continuity between automatic drive positioner control unit harness connector and ground.





Is the inspection result normal?
YES- Replace automatic drive positioner control unit. Refer to "Removal and Installation" Service and Repair.
NO- Repair or replace harness.
Revision: March 20122013 Infiniti JX