Removal and Installation

FRONT FOG LAMP

Removal and Installation


FRONT FOG LAMP

Removal
1.Remove bumper fascia. Refer to "Removal and Installation" Removal and Installation.
2.Disconnect the harness connector from the front fog lamp.
3.Remove front fog lamp bolts.
4.Remove front fog lamp.
Installation
Installation in the reverse order of removal.
NOTE:
After installation, perform fog lamp aiming adjustment. Refer to "Aiming Adjustment" Adjustments.

FRONT FOG LAMP BULB

Removal

WARNING:
To prevent burns, never touch the glass surface of the bulb with bare hands because the surface is very hot just after the lamp is turned OFF.

CAUTION:
- Never touch the glass surface of the bulb with bare hands or allow oil or grease to get on it to prevent damage to the bulb.
- Do not leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect the performance of lamp. When replacing bulb, be sure to replace it with new one.
1.Remove front fender protector. Refer to "FENDER PROTECTOR : Removal and Installation" Removal and Installation.
Revision: March 20122013 Infiniti JX





2.Disconnect the harness connector from the front fog lamp (A).
3.Rotate bulb (1) counterclockwise and remove.
Installation
Installation is in the reverse order of removal.
Revision: March 20122013 Infiniti JX