Power Socket

POWER SOCKET

Removal and Installation


FRONT CONSOLE POWER SOCKET, CONSOLE POWER SOCKET, REAR CONSOLE POWER


SOCKET or REAR CARGO POWER SOCKET

NOTE:
If unable to use the Tool because of power socket location or access to the harness connector, then further removal of interior components may be required. Refer to "Removal and Installation" Cluster Lid D (Front Console
Power Socket), "Removal and Installation" Removal and Installation (Console Power Socket), "Disassembly and Assembly" Center Console Rear Finisher (Rear Console Power Socket) or Rear Cargo Power Socket "LUGGAGE SIDE LOWER FINISHER : Removal and Installation" Luggage Side Lower Finisher.
Removal
1.Remove the fuse for the power socket.





2.Insert one side of the Tool (A) into one of the square holes inside the power socket.
Tool number:- (J-42059)
3.Lift up the handle of the Tool until the other side snaps into the other square hole in the power socket.
4.Pull the power socket straight out with the Tool.





5.Disconnect the harness connector from the power socket.
6.Remove the ring from the power socket finisher while pressing the pawls.
Installation





Installation is in the reverse order of removal.
NOTE:
Make sure to align the tab with the square notched area during installation.
Revision: March 20122013 Infiniti JX