Luggage Side Lower Finisher

LUGGAGE FLOOR TRIM

LUGGAGE SIDE LOWER FINISHER : Removal and Installation


REMOVAL

1.Remove the storage box side finisher (LH/RH). Refer to "STORAGE BOX SIDE FINISHER : Removal and Installation" Storage Box Side Finisher.
2.Remove the third row seat. Refer to "Removal and Installation" Removal and Installation.
3.Partially remove the rear door welt (LH/RH). Refer to "BODY SIDE WELT : Removal and Installation Rear Door Welt" Removal and Installation - Rear Door Welt.
4.Remove the seat belt bolt cover and bolt from the luggage side lower finisher.
5.Remove the seat belt from the luggage side lower finisher.
6.Remove the luggage side lower finisher coat hook bolt and coat hook.





7.Remove the luggage side lower finisher cover, then remove the luggage side lower finisher bolt (A).





8.Disconnect the harness connector from the power socket (LH only).
9.Remove the luggage side lower finisher (LH/RH).

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:
- Visually check the clips and pawls for deformation and damage during installation. Replace with new ones if necessary.
Revision: March 20122013 Infiniti JX
- When installing luggage side lower finisher, check that clips and pawls are securely fitted in body panel holes.