Removal and Installation

FUEL FILLER LID OPENER

Removal and Installation

NOTE:





When fuel filler lid lock actuator (1) is a defective operation, pull the rod to open fuel filler lid.

REMOVAL






1.Remove fuel mounting pin (1).
2.Remove mounting TORX bolts, and then remove fuel filler lid.
3.Remove luggage side lower finisher LH. Refer to "LUGGAGE SIDE LOWER FINISHER : Removal and Installation" Luggage Side Lower Finisher.
4.Disconnect woofer connector.
5.Remove woofer mounting bolts, and then remove woofer.
6.Rotate lock nut counterclockwise, and then remove lock nut.
7.Push fuel filler lid lock actuator behind the vehicle, while pushing the pawl.
8.Disconnect harness connector and remove fuel filler lid lock actuator.
9.Pull and remove lock & rod assembly forward, while pushing the pawls.

INSTALLATION

Note the following items, and then install in the reverse order of removal.

CAUTION:
- After installation, check fuel filler lid assembly open/close, lock/unlock operation.
- After installation, apply touch-up paint (the body color) onto the head of fuel filler lid mounting screws.