Operation CHARM: Car repair manuals for everyone.
Home >> Jeep Truck >> 2009 >> Commander 4WD V8-5.7L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Timing Components >> Variable Valve Timing >> Variable Valve Timing Actuator >> Service and Repair >> Variable Valve Timing Assembly - Installation

Variable Valve Timing Assembly - Installation





INSTALLATION





1. Align the slot (2) in the phaser (1) with the dowel on the camshaft.






CAUTION: Never attempt to disassemble the camshaft phaser, severe engine damage could result.

2. Position the phaser (2) in place and install phaser retaining bolt (1) and tighten to 122 Nm (90 ft. lbs.).
3. Install the timing chain and sprockets Timing Chain & Sprockets - Installation

pro multis · About Operation CHARM