LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2010 >> Forte EX, Standard >> Repair and Diagnosis (Single Page) >> Restraints >> Air Bag, SRS >> Airbag Module (Restraints - Advanced) >> Driver Airbag (DAB) Module and Clock Spring >> Repair procedures >> Removal

Repair procedures: Removal

  1. Disconnect the battery negative cable and wait for at least three minutes before beginning work.
  2. Remove the driver airbag module mounting bolts (2EA).
    Fig 1: Locating Driver Airbag Module Mounting Bolts
    G06494727Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the wiring fixing clip (A) and disconnect airbag module connector (B).
    Fig 2: Identifying Wiring Fixing Clip & Airbag Module Connector
    G06494728Courtesy of KIA MOTORS AMERICA, INC.
  4. Separate the airbag module from the steering wheel.
    CAUTION: The removed airbag module should be stored in a clean, dry place with the pad cover face up.
  5. Remove the steering wheel and steering column shroud. (Refer to STEERING COLUMN AND SHAFT )
  6. Disconnect the clock spring and horn connector, then remove the clock spring.
    Fig 3: Identifying Clock Spring & Horn Connector
    G06494729Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals