LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2010 >> Sedona Base >> Repair and Diagnosis (Single Page) >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heater >> Mode Control Actuator >> Repair procedures >> Replacement >> Notes

Repair procedures: Replacement: Notes

  1. Disconnect the negative (-) battery terminal.
  2. Remove the driver's crash pad lower panel. (Refer to CRASH PAD )
  3. Disconnect the mode control actuator connector (A) after removing the air duct.
  4. Loosen the mounting screws and then remove the mode control actuator (B).
scientia non olet · About LEMON Manuals