Parking Assist Control Module: Service and Repair

Parking Aid Module

Removal
1 Remove the C-pillar lower trim panel. For additional information, refer to C-Pillar Lower Trim Panel C-Pillar Lower Trim Panel




2 Remove the parking aid module.
- Disconnect the 3 electrical connectors.
- Remove the 2 nuts.

Installation
1 Install the parking aid module.
- Tighten the nuts to 5 Nm (4 lb.ft).
- Connect the electrical connectors.
2 Install the C-pillar lower trim panel. For additional information, refer to C-Pillar Lower Trim Panel C-Pillar Lower Trim Panel