Rear Seat Backrest Cover

Rear Seat Backrest Cover

Removal
1 Remove the rear seat. For additional information, refer to Rear Seat Rear Seat




2 Remove the rear seat backrest catch trim panel.
- Release the 3 clips.




3 Remove the rear seat backrest rear cover lower trim panel.
- Remove the 2 screws.
- Release the 3 clips.




4 Carefully release the rear seat backrest cover from the upper part of the rear seat frame.




5 Remove the rear seat backrest rear cover inner side trim panel.
- Release the rear seat armrest cover securing strip.
- Remove the screw.
- Release the 11 inner side trim panel clips from the rear seat backrest cover.
6 Remove the rear seat backrest rear cover.
- Release the rear seat backrest rear cover adhesive.




7 Remove the rear seat backrest inner hinge cover.
- Remove the 3 screws.




8 Remove the rear seat base lower trim panel.
- Remove the 6 clips.
- Reposition the rear seat hinge plates for access.
9 Reposition the rear seat armrest fully forwards.
- Release the rear seat armrest catch.





10 Release the rear seat armrest cover from the rear seat backrest.
- Release the rear seat armrest cover securing strip.
- Release the rear seat armrest cover securing rail.





11 Remove the rear seat armrest.
- Remove the bolt.
- Reposition the rear seat armrest from the rear seat armrest hinge.





12 Remove the rear seat backrest inner hinge.
- Remove the 4 bolts.
- Discard the 2 lower bolts.





13 Remove the rear seat backrest outer hinge cover.
- Remove the 2 screws.





14 Remove the rear seat backrest from the rear seat base.
- Remove the rear seat backrest outer hinge bolt.

15 Remove the rear seat backrest hinge wiring harness clip.
- Remove the 2 clips.
- Release the rear seat base wiring harness electrical connector from the rear seat backrest cover.
- Disconnect the rear seat base wiring harness electrical connector.





16 Release the rear seat cushion cover from the rear seat base.





17 Reposition the safety belt through the rear seat cushion cover and the rear seat cushion.
- Remove and discard the safety belt bolt from the rear seat base.





18 Remove the rear seat backrest cover safety belt trim panel.
- Remove the 2 screws.





19 Release the rear seat backrest cover from the rear seat backrest.

20 Remove the rear seat backrest catch trim panel.
- Carefully release the 4 clips.

21 Reposition the rear seat backrest cushion and cover from the rear seat backrest for access.

22 Reposition the safety belt through the rear seat backrest cushion and cover.





23 Using a suitable tool, release the head restraint guide tubes.
- Release the 6 clips.

24 Remove the rear seat backrest cushion and cover from the rear seat backrest.
- Reposition the safety belt.





25
NOTE:
Do not disassemble further if the component is removed for access only.
Remove the rear seat backrest cover from the rear seat backrest cushion.
- Remove and discard the 16 clips from the rear seat backrest cover.

Installation
1 Install the rear seat backrest cover to the rear seat backrest cushion.
- Install the 16 new clips to the rear seat backrest cover.
2 Install the rear seat backrest cushion and cover to the rear seat backrest.
- Reposition the safety belt.
3 Install the head restraint guide tubes.
- Secure the 6 clips.
4 Reposition the safety belt through the rear seat backrest cushion and cover.
5 Reposition the rear seat backrest cushion and cover to the rear seat backrest.
6 Install the rear seat backrest catch trim panel.
- Secure the 4 clips.
7 Secure the rear seat backrest cover to the rear seat backrest.
8 Install the rear seat backrest cover safety belt trim panel.
- Install the 2 screws.
9 Reposition the safety belt through the rear seat cushion cover and the rear seat cushion.
- Install the new safety belt bolt to the rear seat base and tighten to 31 Nm (23 lb.ft).

10 Secure the rear seat cushion cover to the rear seat base.

11 Install the rear seat backrest hinge wiring harness clip.
- Secure the 2 clips.
- Secure the rear seat base wiring harness electrical connector to the rear seat backrest cover.
- Connect the rear seat base wiring harness electrical connector.

12 Secure the rear seat backrest to the rear seat base.
- Install the rear seat backrest outer hinge bolt and tighten to 45 Nm (33 lb.ft).

13 Install the rear seat backrest outer hinge cover.
- Install the 2 screws.

14 Install the rear seat backrest inner hinge.
- Install the 2 upper bolts.
- Install the 2 new lower bolts.
- Tighten the bolts to 25 Nm (18 lb.ft).

15 Install the rear seat armrest.
- Install the bolt.
- Reposition the rear seat armrest to the rear seat armrest hinge.

16 Secure the rear seat armrest cover to the rear seat backrest.
- Secure the rear seat armrest cover securing strip.
- Secure the rear seat armrest cover securing rail.

17 Reposition the rear seat armrest to the original position.
- Secure the rear seat armrest catch.

18 Install the rear seat base lower trim panel.
- Install the 6 clips.
- Reposition the rear seat hinge plates for access.

19 Install the rear seat backrest inner hinge cover.
- Install the 3 screws.

20 Install the rear seat backrest rear cover.
- Apply a suitable adhesive to the rear seat backrest rear cover.

21 Install the rear seat backrest rear cover inner side trim panel.
- Secure the 11 inner side trim panel clips to the rear seat backrest cover.
- Install the screw.
- Secure the rear seat armrest cover securing strip.

22 Carefully secure the rear seat backrest cover to the upper part of the rear seat frame.

23 Install the rear seat backrest rear cover lower trim panel.
- Secure the 3 clips.
- Install the 2 screws.

24 Install the rear seat backrest catch trim panel.
- Secure the 3 clips.

25 Install the rear seat. For additional information, refer to Rear Seat Rear Seat