Installation

DOOR LOCK: DOOR CONTROL RECEIVER: INSTALLATION

1. INSTALL DOOR CONTROL RECEIVER

(a) Install the receiver with the bolt.

Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)

(b) Connect the connector.

2. INSTALL REAR QUARTER TRIM PANEL ASSEMBLY LH Installation

3. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH Installation

4. INSTALL REAR SEATBACK LOCK CONTROL LEVER BASE LH (w/o Rear No. 2 Seat) Installation

5. INSTALL ASSIST GRIP SUB-ASSEMBLY (w/ Rear No. 2 Seat) Installation

6. INSTALL ASSIST GRIP PLUG (w/ Rear No. 2 Seat) Installation

7. INSTALL FRONT DECK SIDE TRIM COVER (w/ Tonneau Cover) Installation

8. INSTALL NO. 1 TONNEAU COVER HOLDER CAP (w/o Tonneau Cover) Installation

9. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK Installation

10. INSTALL REAR NO. 1 SEAT OUTER LAP BELT ANCHOR COVER Installation

11. INSTALL REAR FLOOR CARPET ASSEMBLY (w/o Rear No. 2 Seat) Installation

12. INSTALL REAR FLOOR MAT REAR SUPPORT PLATE (w/o Rear No. 2 Seat) Installation

13. INSTALL NO. 1 DECK BOARD SUB-ASSEMBLY (w/o Rear No. 2 Seat) Installation

14. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER (w/o Rear No. 2 Seat) Installation

15. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover) Installation

16. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH Installation

17. INSTALL REAR DOOR SCUFF PLATE LH Installation

18. INSTALL QUARTER SCUFF PLATE LH (w/ Rear No. 2 Seat) Installation

19. INSTALL REAR NO. 1 FLOOR STEP COVER (w/ Rear No. 2 Seat) Installation

20. INSTALL REAR NO. 1 SEATBACK ASSEMBLY (w/ Rear No. 1 Seat)

(a) for 60/40 Split Double-folding Seat Type LH Side:

Install the rear No. 1 seatback assembly Installation.

(b) for 60/40 Split Double-folding Seat Type RH Side:

Install the rear No. 1 seatback assembly Installation.

21. INSTALL REAR NO. 1 SEAT ASSEMBLY (w/ Rear No. 1 Seat)

(a) for 60/40 Split Slide Walk-in Seat Type LH Side:

Install the rear No. 1 seat assembly Installation.

(b) for 60/40 Split Slide Walk-in Seat Type RH Side:

Install the rear No. 1 seat assembly Installation.

22. INSTALL REAR NO. 2 SEAT ASSEMBLY (w/ Rear No. 2 Seat)

(a) Install the rear No. 2 seat assembly Installation.

23. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.