Installation

AUDIO / VIDEO: MULTI-MEDIA INTERFACE ECU: INSTALLATION

1. INSTALL NO. 1 MULTI-MEDIA INTERFACE BRACKET

(a) Install the No. 1 multi-media interface bracket with the bolt.

2. INSTALL NO. 2 MULTI-MEDIA INTERFACE BRACKET

(a) Install the No. 2 multi-media interface bracket with the bolt.

3. INSTALL MULTI-MEDIA INTERFACE ECU

(a) Install the multi-media interface ECU with the 2 nuts.

Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)

(b) Connect the 3 connectors.

4. INSTALL INSTRUMENT PANEL BOX ASSEMBLY Installation

5. INSTALL INSTRUMENT PANEL BOX DOOR COVER Installation

6. INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY Installation

7. INSTALL LOWER INSTRUMENT COVER LH Installation

8. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

9. INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY Installation

10. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL GARNISH Installation

11. INSTALL INSTRUMENT SIDE PANEL RH Installation

12. INSTALL COWL SIDE TRIM BOARD RH Installation

13. INSTALL DOOR SCUFF PLATE ASSEMBLY RH Installation

14. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

15. CHECK SRS WARNING LIGHT

(a) Check the SRS warning light Diagnosis System.