Installation

VF4BM TRANSFER / 4WD / AWD: 4WD CONTROL ECU: INSTALLATION

1. INSTALL 4 WHEEL DRIVE CONTROL ECU NO.2

(a) Install the four wheel drive control ECU with the bolt.

Torque : 13 Nm (127 kgf-cm, 9 ft-lbf)

(b) Connect the 2 connectors.

2. INSTALL INSTRUMENT PANEL BOX ASSEMBLY Installation

3. INSTALL INSTRUMENT PANEL BOX DOOR COVER Installation

4. INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY Installation

5. INSTALL LOWER INSTRUMENT COVER LH Installation

6. INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY Installation

7. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL GARNISH Installation

8. INSTALL INSTRUMENT SIDE PANEL RH Installation

9. INSTALL COWL SIDE TRIM BOARD RH Installation

10. INSTALL DOOR SCUFF PLATE ASSEMBLY RH Installation

11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

12. CHECK SRS WARNING LIGHT

(a) Check the SRS warning light Diagnosis System.