Installation

DOOR / HATCH: FUEL LID OPENER SWITCH: INSTALLATION

1. INSTALL FUEL LID OPENER SWITCH

(a) Attach the 2 claws and install the fuel lid opener switch.

2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Installation

3. INSTALL INSTRUMENT PANEL FINISH PANEL END LH Installation

4. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

5. INSTALL COWL SIDE TRIM BOARD LH Installation

6. INSTALL DOOR SCUFF PLATE ASSEMBLY LH Installation

7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

8. CHECK SRS WARNING LIGHT

(a) Check the SRS warning light Diagnosis System.