Reading and Clearing Diagnostic Trouble Codes

POWER ASSIST SYSTEMS: POWER STEERING SYSTEM: DTC CHECK / CLEAR

1. CHECK DTC

(a) Turn the power switch off.

(b) Connect the Techstream to the DLC3.

(c) Turn the power switch on (IG).

(d) Turn the Techstream on.

(e) Read the DTCs following the display on the Techstream. Enter the following menus: Chassis / EMPS / DTC.

(f) Refer to Diagnostic Trouble Code Chart for DTC information Power Steering System.

2. CLEAR DTC

(a) Turn the power switch off.

(b) Connect the Techstream to the DLC3.

(c) Turn the power switch on (IG).

(d) Turn the Techstream on.

(e) Clear the DTCs following the display on the Techstream. Enter the following menus: Chassis / EMPS / DTC.

(f) According to the display on the Techstream, select the trouble code data display with the clear button.

(g) Turn the power switch off.

(h) Disconnect the Techstream from the DLC3.