Television Display Screen is White

AUDIO / VISUAL: REAR SEAT ENTERTAINMENT SYSTEM: Television Display Screen is White

Television Display Screen is White

INSPECTION PROCEDURE

PROCEDURE

1. CHECK MODE IN WHICH WHITE SCREEN OCCURRED
(a) Check the mode in which the white screen occurred.

Result





B -- CHECK DISC
A -- Continue to next step.
2. CHECK DISPLAY (RSE IMAGE QUALITY ADJUSTMENT SCREEN)





(a) Press the remote controller's DISPLAY switch, and adjust the settings for contrast, tint and color.
OK:
Returned to normal through Image quality adjustment.
NG -- REPLACE TELEVISION DISPLAY ASSEMBLY
OK -- END
3. CHECK DISC





(a) Check that the disc is not deformed or cracked.
OK:
No deformation or cracks on the disc.
NG -- CHANGE DISC
OK -- Continue to next step.
4. DISC CLEANING





(a) Disc cleaning
(1) If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.
NOTE: Do not use a conventional record cleaner or antistatic preservative.

NEXT -- Continue to next step.
5. CHECK DISPLAY SIGNAL CIRCUIT
(a) Inspect the display signal circuits below.
(1) Inspect the display signal circuit between the radio receiver and television display assembly Display Signal Circuit between Radio Receiver and Television Display Assembly.
(2) Inspect the display signal circuit between the video terminal and television display Display Signal Circuit Between Video Terminal and Television Display.
(b) If display signal circuit is operating normally, proceed to next step.
NEXT -- REPLACE TELEVISION DISPLAY ASSEMBLY