Installation

LIGHTING: REAR COMBINATION LIGHT ASSEMBLY: INSTALLATION

INSTALLATION

1. INSTALL REAR COMBINATION LIGHT ASSEMBLY






(a) Attach 4 claws to install the rear combination light.
(b) Install the 3 nuts.
(c) Connect the connector.
2. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH

3. INSTALL REAR FLOOR FINISH PLATE

4. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER

5. INSTALL NO. 1 COOLER COVER (w/ Rear Cooler) Installation

6. INSTALL NO. 2 COURTESY LIGHT ASSEMBLY

7. INSTALL DECK TRIM SIDE BOARD RH

8. INSTALL ROPE HOOK ASSEMBLY

9. INSTALL ROPE HOOK

10. INSTALL BATTERY SERVICE HOLE COVER

11. INSTALL BATTERY SERVICE HOLE COVER LH Battery

12. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY

13. INSTALL REAR LIGHT ASSEMBLY






(a) Install the rear light with the 4 nuts.
(b) Connect the connector.
14. INSTALL BACK DOOR TRIM COVER Installation

15. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY Installation

16. INSTALL SWITCH BEZEL (w/ Power Trunk Lid System) Installation

17. INSTALL LUGGAGE COMPARTMENT DOOR ASSIST GRIP Installation

18. INSTALL REAR COMBINATION LIGHT SERVICE COVER RH Installation

19. INSTALL REAR COMBINATION LIGHT SERVICE COVER LH Installation

20. INSTALL LUGGAGE COMPARTMENT DOOR COVER RH Installation

21. INSTALL LUGGAGE COMPARTMENT DOOR COVER LH Installation