Removal

2UR-FSE ENGINE MECHANICAL: DRIVE BELT: REMOVAL

REMOVAL

1. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

2. REMOVE AIR CLEANER INLET COVER SUB-ASSEMBLY Removal

3. REMOVE NO. 1 AIR CLEANER INLET Removal

4. REMOVE INTAKE AIR CONNECTOR PIPE Removal

5. REMOVE V-RIBBED BELT






(a) Rotate the tensioner pulley counterclockwise to loosen the belt tension.
HINT: The pulley bolt for the belt tensioner has a left-handed thread.





(b) While turning the belt tensioner counterclockwise, align the holes. Insert a bar of dia5 mm (0.197 in.) into the holes to fix the belt tensioner in place.
(c) Remove the V-ribbed belt.