Installation

PARKING BRAKE: ELECTRIC PARKING BRAKE ECU: INSTALLATION

INSTALLATION

1. INSTALL ELECTRIC PARKING BRAKE ECU






(a) Install the ECU with the 2 nuts.
Torque: 5.5 Nm (56 kgf-cm, 49 in-lbf)
(b) Connect the 2 ECU connectors.
2. INSTALL SEAT BELT CONTROL ECU Installation

3. INSTALL REAR ACTIVE STABILIZER CONTROL ECU (w/ Active Stabilizer System) Installation

4. INSTALL SEAT VIBRATOR MODULE (for Ottoman) Installation

5. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH

6. INSTALL REAR FLOOR FINISH PLATE

7. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER

8. INSTALL NO. 1 COOLER COVER (w/ Rear Cooler) Installation

9. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

10. INSTALL DECK TRIM SIDE BOARD RH

11. INSTALL ROPE HOOK ASSEMBLY

12. INSTALL ROPE HOOK

13. INSTALL BATTERY CARRIER Installation

14. INSTALL BATTERY Installation

15. INSTALL SPARE TIRE
16. INSTALL TOOL BOX
17. INSTALL SERVICE PLUG GRIP Installation

18. INSTALL BATTERY SERVICE HOLE COVER Hybrid Battery Service Switch

19. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY

20. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

21. INSTALL BATTERY SERVICE HOLE COVER LH Battery

22. PERFORM CALIBRATION
(a) Clear the electric parking brake ECU memory and acquire tension sensor zero point Programming and Relearning.