Installation

CRUISE CONTROL: OBJECT RECOGNITION ECU: INSTALLATION

INSTALLATION





1. INSTALL OBJECT RECOGNITION ECU
(a) Attach the 2 clips.
(b) Install the ECU with the 2 bolts.
Torque: 7.4 Nm (76 kgf-cm, 66 in-lbf)
(c) Connect the 2 connectors.
NOTE: Do not use an ECU which has been dropped or subjected to any strong shocks.

2. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY RH

3. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER

4. INSTALL NO. 1 COOLER COVER (w/ Rear Cooler) Installation

5. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

6. INSTALL REAR FLOOR FINISH PLATE

7. INSTALL DECK TRIM SIDE BOARD RH

8. INSTALL ROPE HOOK

9. INSTALL ROPE HOOK ASSEMBLY

10. INSTALL BATTERY SERVICE HOLE COVER Hybrid Battery Service Switch

11. INSTALL BATTERY SERVICE HOLE COVER LH Battery

12. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY

13. ADJUST OBJECT RECOGNITION CAMERA Adjustments