Removal

LIGHTING: HAZARD WARNING SWITCH: REMOVAL

REMOVAL

1. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY

2. REMOVE BATTERY SERVICE HOLE COVER LH Battery

3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
NOTICE:
- After the power switch is turned OFF, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the power switch OFF, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

4. REMOVE INSTRUMENT PANEL FINISH PANEL END RH Removal

5. REMOVE INSTRUMENT PANEL FINISH PANEL END LH Removal

6. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY Removal

7. REMOVE NO. 3 BOX PANEL Removal

8. REMOVE REAR CONSOLE PANEL UPPER Removal

9. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY Removal

10. REMOVE RADIO RECEIVER ASSEMBLY Removal

11. REMOVE MULTI-DISPLAY ASSEMBLY Removal

12. REMOVE DISPLAY AND NAVIGATION MODULE DISPLAY (for HDD) Removal

13. REMOVE HAZARD WARNING SWITCH






(a) Disconnect the connector.
(b) Detach the 2 claws and remove the hazard warning switch.