Removal

L110 HYBRID TRANSMISSION / TRANSAXLE: TRANSMISSION CONTROL SWITCH: REMOVAL

REMOVAL

1. REMOVE LUGGAGE COMPARTMENT FLOOR MAT
2. REMOVE BATTERY SERVICE HOLE COVER LH Removal
3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL Removal
4. REMOVE SHIFT LEVER KNOB Removal
5. REMOVE FRONT CONSOLE UPPER PANEL GARNISH Removal
6. REMOVE UPPER CONSOLE PANEL ASSEMBLY Removal
7. REMOVE INSTRUMENT PANEL FINISH PANEL END RH Removal
8. REMOVE INSTRUMENT PANEL FINISH PANEL END LH Removal
9. REMOVE CONSOLE BOX PLATE Removal
10. REMOVE CONSOLE BOX REGISTER ASSEMBLY Removal
11. REMOVE CONSOLE BOX ASSEMBLY Removal
12. REMOVE NO. 2 CONSOLE BOX DUCT Removal
13. REMOVE HEATED OXYGEN SENSOR
(a) Remove the heated oxygen sensor Removal.
14. REMOVE FRONT FLOOR BRACE CENTER Removal
15. REMOVE REAR FLOOR NO. 1 PANEL BRACE Removal
16. REMOVE FRONT EXHAUST PIPE ASSEMBLY Removal
17. REMOVE FRONT FLOOR COVER CENTER RH





(a) Remove the 3 grommets, and front floor cover center RH.
18. REMOVE FRONT FLOOR NO. 1 HEAT INSULATOR Removal
19. REMOVE FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY Removal
20. REMOVE TRANSMISSION FLOOR SHIFT ASSEMBLY Removal
21. REMOVE TRANSMISSION CONTROL SWITCH





(a) Remove the shift lock control ECU connector from the floor shift assembly.





(b) Remove the shift lever nut and lock pin from the floor shift assembly.
(c) Remove the shift lever guide housing from the floor shift assembly.
NOTICE:
First remove the shift lever nut and lock pin, then disengage the 2 claws.





(d) Remove the transmission control switch from the shift lever guide housing.