Installation

POWER STEERING: POWER STEERING ECU: INSTALLATION

INSTALLATION

1. INSTALL POWER STEERING ECU





(a) Attach the claw and install the ECU with the 4 bolts.
Torque: 8.5 Nm (87 kgf-cm, 75in-lbf)
(b) Connect the connector C to the ECU.





(c) Connect the ECU connectors A and B and securely lock the connectors.
2. INSTALL NO. 1 INVERTER RESERVOIR BRACKET





(a) Install the bracket with the 2 bolts.
Torque: 13 Nm (133 kgf-cm, 10ft-lbf)





(b) Install the reservoir with the 2 nuts.
Torque: 13 Nm (133 kgf-cm, 10ft-lbf)
3. INSTALL AIR CLEANER ASSEMBLY RH Installation
4. INSTALL AIR CLEANER INLET COVER SUB-ASSEMBLY
(a) Install the inlet cover with the 5 clips.
5. INSTALL ENGINE ROOM SIDE COVER
(a) Install the side cover with the 4 clips.
6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

7. INSTALL BATTERY SERVICE HOLE COVER LH Installation
8. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY Installation
9. PERFORM VARIABLE GEAR RATIO STEERING SYSTEM CALIBRATION
(a) Perform variable gear ratio steering system calibration Variable Gear Ratio Steering System.