Installation

SUPPLEMENTAL RESTRAINT SYSTEM: FRONT PASSENGER AIRBAG ASSEMBLY: INSTALLATION

INSTALLATION

1. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY

(a) Attach the 5 hooks (A).
(b) Attach the 5 hooks (B) and install the front passenger airbag on the instrument panel.

(d) Connect the 2 connectors and install the instrument panel wire assembly to the front passenger airbag.
NOTICE:
When handling the airbag connector, take care not to damage the airbag wire harness.

2. INSTALL NO. 3 HEATER TO REGISTER DUCT Reassembly
3. INSTALL DEFROSTER NOZZLE ASSEMBLY Reassembly
4. INSTALL SIDE NO. 1 DEFROSTER NOZZLE DUCT Reassembly
5. INSTALL SIDE NO. 2 DEFROSTER NOZZLE DUCT Reassembly
6. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY
HINT: Refer to the procedures from "INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY" Installation.

7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

8. INSTALL BATTERY SERVICE HOLE COVER LH Installation
9. INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire) Installation
10. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY Installation
11. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light Diagnosis System.