Installation

SUPPLEMENTAL RESTRAINT SYSTEM: FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY: INSTALLATION

INSTALLATION

1. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY





(a) Connect the connector.
NOTICE:
When handling the airbag connector, take care not to damage the airbag wire harness.

(b) Install the front passenger side knee airbag with the 3 bolts, and attach the claw.
Torque: 10 Nm (102 kgf-cm, 7ft-lbf)
2. INSTALL LOWER INSTRUMENT PANEL





(a) Attach the clip and 2 claws to install the panel.
3. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation
4. INSTALL INSTRUMENT SIDE PANEL RH Installation
5. INSTALL INSTRUMENT PANEL FINISH PANEL END RH Installation
6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

7. INSTALL BATTERY SERVICE HOLE COVER LH Installation
8. INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire) Installation
9. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY Installation
10. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light How To Proceed With Troubleshooting.