Installation

CRUISE CONTROL: MILLIMETER WAVE RADAR SENSOR: INSTALLATION

1. INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY

(a) Temporarily install the millimeter wave radar sensor assembly with the 3 nuts.





(b) Tighten the 3 nuts in the order shown in the illustration to install the millimeter wave radar sensor assembly.

Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)

(c) Connect the connector.

2. INSTALL FRONT BUMPER ASSEMBLY

(a) Install the Front Bumper Assembly Installation.

3. ADJUST MILLIMETER WAVE RADAR SENSOR ASSEMBLY Adjustments