Removal

ENGINE HOOD / DOOR: TRUNK LID ACTUATOR: REMOVAL

1. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY Removal

2. REMOVE DECK TRIM SIDE BOARD LH (w/o Spare Tire) Removal

3. REMOVE BATTERY SERVICE HOLE COVER LH Removal

4. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
* w/ Navigation System (for HDD):
* After the power switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the power switch off, be sure to wait for the time specified in the following table before disconnecting the cable from the negative (-) battery terminal.

Waiting Time before Disconnecting Cable from Negative (-) Battery Terminal:





* When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.
5. REMOVE ROPE HOOK Removal

6. REMOVE ROPE HOOK ASSEMBLY Removal

7. REMOVE DECK TRIM SIDE BOARD RH Removal

8. REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY Removal

9. REMOVE NO. 1 COOLER COVER (w/ Rear Cooler) Removal

10. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER Removal

11. REMOVE DECK BOARD ASSEMBLY (w/o Spare Tire)

12. REMOVE TOOL BOX (w/o Spare Tire) Removal

13. REMOVE REAR FLOOR FINISH PLATE Removal

14. REMOVE LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH Removal

15. REMOVE TRUNK LID ACTUATOR

(a) Disconnect the connector.





(b) Remove the 3 bolts and nut.

(c) Remove the trunk lid actuator.