Installation

INTERIOR: REAR SUNSHADE ASSEMBLY: INSTALLATION

1. INSTALL REAR SUNSHADE RELAY

NOTICE:
When reassembling the rear sunshade assembly, eliminate static electricity by touching the vehicle body to prevent the components from being damaged.

(a) Install the rear sunshade relay with the 2 screws.





(b) Connect the connector.

(c) Engage the 4 claws and install the rear sunshade relay cover.





(d) Install the screw.

2. INSTALL REAR WINDOW SHADE ASSEMBLY

(a) Install the rear window shade assembly, and temporarily tighten the 4 bolts [A] and bolt [B].





(b) Fully tighten the 5 bolts.

(c) Connect the connector.

3. INSTALL NO. 2 PACKAGE TRAY TRIM PANEL ASSEMBLY

(a) Engage the 6 claws and 3 clips, and install the No. 2 package tray trim panel assembly.





4. INSTALL CENTER STOP LIGHT SET Installation

5. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY

(a) Thread the 3 rear seat belt floor anchors into the package tray trim panel assembly.





(b) Insert the rear end of the package tray trim panel assembly into the rear window shade assembly.

(c) Engage the 2 clips and install the package tray trim panel assembly.

6. INSTALL REAR SEAT SHOULDER BELT HOLE COVER Installation

7. CONNECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH Installation

8. CONNECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY LH Installation

9. CONNECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY RH Installation

10. INSTALL ROOF SIDE INNER GARNISH ASSEMBLY LH Installation

11. INSTALL ROOF SIDE INNER GARNISH ASSEMBLY RH Installation

12. INSTALL REAR SEAT SIDE AIRBAG ASSEMBLY LH Installation

13. INSTALL REAR SEAT SIDE AIRBAG ASSEMBLY RH

HINT
Use the same procedure for the LH side and RH side.

14. INSTALL REAR DOOR SCUFF PLATE LH Installation

15. INSTALL REAR DOOR SCUFF PLATE RH Installation

16. INSTALL REAR SEATBACK ASSEMBLY Installation

17. INSTALL REAR CENTER SEAT HEADREST ASSEMBLY

18. INSTALL REAR SEAT HEADREST ASSEMBLY

19. INSTALL REAR SEAT CUSHION ASSEMBLY Installation

20. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

21. PERFORM INITIALIZATION

NOTICE:
Some systems need initialization after reconnecting the cable to the negative battery terminal Repair Instruction - Initialization.

22. INSPECT SRS WARNING LIGHT

Diagnosis System