Installation

NAVIGATION / MULTI INFO DISPLAY: MULTI-DISPLAY: INSTALLATION

1. INSTALL DISPLAY AND NAVIGATION MODULE DISPLAY

2. INSTALL NAVIGATION ECU (w/ Navigation System for DVD) Installation

3. INSTALL CLOCK ASSEMBLY Installation

4. INSTALL DISPLAY AND NAVIGATION MODULE DISPLAY ASSEMBLY

(a) Install the display and navigation module display assembly as shown in the illustration.





5. INSTALL NO. 2 RADIO BRACKET Installation

6. INSTALL NO. 1 RADIO BRACKET Installation

7. INSTALL HARD DISK DRIVE (w/ Navigation System for HDD) Installation

8. INSTALL DISPLAY AND NAVIGATION MODULE DISPLAY WITH RADIO RECEIVER ASSEMBLY Installation

9. INSTALL CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL Installation

10. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY Installation

11. INSTALL FRONT ASH RECEPTACLE BOX SUB-ASSEMBLY (w/ Ashtray) Installation

12. INSTALL INSTRUMENT PANEL COIN BOX (w/o Ashtray) Installation

13. INSTALL CONSOLE PANEL SUB-ASSEMBLY (for Automatic Transmission) Installation

14. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH (for Automatic Transmission) Installation

15. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH (for Automatic Transmission) Installation

16. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transmission) Installation

17. INSTALL FRONT CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission) Installation

18. INSTALL REAR CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission) Installation

19. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission) Installation

20. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Navigation System for HDD)

21. ADJUST CLOCK

22. INSPECT HARD DISK DRIVE (w/ Navigation System for HDD)

Operation Check