Removal

SUPPLEMENTAL RESTRAINT SYSTEM: REAR AIRBAG SENSOR: REMOVAL

HINT
* Use the same procedures for the LH side and RH side.
* The procedures listed below are for the LH side.

1. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY Removal

2. REMOVE DECK TRIM SIDE BOARD LH (w/o Spare Tire) Removal

3. REMOVE BATTERY SERVICE HOLE COVER LH Removal

4. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

NOTICE:
* w/ Navigation System (for HDD):
After the power switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the power switch off, be sure to wait for the time specified in the following table before disconnecting the cable from the negative (-) battery terminal.

Waiting Time before Disconnecting Cable from Negative (-) Battery Terminal:





* When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

5. REMOVE REAR SEAT CUSHION ASSEMBLY LH (for Power Seat) Removal

6. REMOVE REAR SEAT CUSHION ASSEMBLY (for Ottoman)

(a) Remove the rear seat cushion assembly LH Removal.

(b) Remove the rear seat cushion assembly RH Removal.

7. REMOVE REAR SEAT CUSHION ASSEMBLY (for Fixed Seat Type) Removal

8. REMOVE REAR SEATBACK ASSEMBLY LH (for Power Seat) Removal

9. REMOVE REAR SEATBACK ASSEMBLY CENTER (for Power Seat) Removal

10. REMOVE REAR SEATBACK ASSEMBLY (for Ottoman)

(a) Remove the rear seatback assembly LH Removal.

(b) Remove the rear seatback assembly RH Removal.

11. REMOVE REAR SEATBACK ASSEMBLY LH (for Fixed Seat Type) Removal

12. REMOVE REAR DOOR SCUFF PLATE LH Removal

13. REMOVE REAR SEAT SIDE GARNISH LH Removal

14. REMOVE REAR AIRBAG SENSOR

(a) Remove the bolt and rear airbag sensor.





(b) Disconnect the connector.