Reassembly

DOOR / HATCH: BACK DOOR: REASSEMBLY

1. INSTALL BACK DOOR STAY BOLT LH Installation

2. INSTALL BACK DOOR STAY BOLT RH

HINT
Use the same procedure as for the LH side.

3. INSTALL BACK DOOR STAY ASSEMBLY LH Installation

4. INSTALL BACK DOOR STAY ASSEMBLY RH

HINT
Use the same procedure as for the LH side.

5. INSTALL REAR WIPER MOTOR ASSEMBLY (w/ Rear Wiper) Installation

6. INSTALL REAR WIPER MOTOR GROMMET (w/ Rear Wiper) Installation

7. INSTALL REAR WIPER ARM AND BLADE ASSEMBLY (w/ Rear Wiper) Installation

8. INSTALL REAR WIPER ARM HEAD CAP (w/ Rear Wiper) Installation

9. INSTALL REAR WASHER NOZZLE (w/ Rear Wiper) Installation

10. INSPECT REAR WASHER NOZZLE (w/ Rear Wiper) Washer Nozzle (For Rear Side)

11. ADJUST REAR WASHER NOZZLE (w/ Rear Wiper) (For Rear Side)

12. INSTALL REAR SPOILER SUB-ASSEMBLY

13. INSTALL NO. 4 ANTENNA CORD SUB-ASSEMBLY Installation

14. INSTALL ROOF HEADLINING ASSEMBLY

Installation

15. INSTALL RADIO SETTING CONDENSER Installation

16. INSTALL REAR TELEVISION CAMERA ASSEMBLY (w/ Rear Monitor) Installation

17. INSTALL AMPLIFIER ANTENNA ASSEMBLY Installation

18. INSTALL LICENSE PLATE LIGHT ASSEMBLY LH Installation

19. INSTALL LICENSE PLATE LIGHT ASSEMBLY RH

HINT
Use the same procedure for the RH side and LH side.

20. INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY

21. INSTALL BACK DOOR OPENER SWITCH ASSEMBLY Installation

22. INSTALL REAR LIGHT ASSEMBLY LH Installation

23. INSTALL REAR LIGHT ASSEMBLY RH

HINT
Use the same procedure as for the LH side.

24. INSTALL BACK DOOR WEIGHT

(a) Engage the guide.





(b) Install the back door weight with the 4 bolts.

25. INSTALL LOWER BACK DOOR STOPPER CUSHION

(a) Engage the claws to install 2 new lower back door stopper cushions.





26. INSTALL BACK DOOR LOCK STRIKER ASSEMBLY

(a) Using a T40 "TORX" socket wrench, install the back door lock striker assembly with the 2 screws.





Torque : 23 Nm (235 kgf-cm, 17 ft-lbf)

27. INSTALL BACK DOOR LOCK STRIKER COVER

(a) Engage the 2 claws to install the back door lock striker cover.





28. INSTALL BACK DOOR TRIM BOARD ASSEMBLY

(a) Engage the 13 clips to install the back door trim board assembly.





HINT
Engage the clips in the order shown in the illustration.

(b) Slide the handle plate of the back door trim board to engage it.





29. INSTALL BACK DOOR SIDE GARNISH LH

(a) Engage the 2 clips, 2 claws and guide to install the back door side garnish LH.





30. INSTALL BACK DOOR SIDE GARNISH RH

(a) Engage the 2 clips, 2 claws and guide to install the back door side garnish RH.





31. INSTALL UPPER BACK DOOR TRIM PANEL ASSEMBLY

(a) Engage the 4 clips and 4 claws to install the upper back door trim panel assembly.





32. ADJUST TELEVISION CAMERA (w/ Parking Assist Monitor System)

Calibration