Installation

2ZR-FXE ENGINE CONTROL: ENGINE COOLANT TEMPERATURE SENSOR: INSTALLATION

1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR

(a) Install the engine coolant temperature sensor through a new gasket.





Text in Illustration





SST : 09205-76030

without SST - Torque : 20 Nm (200 kgf-cm, 14 ft-lbf)

with SST - Torque : 17 Nm (175 kgf-cm, 13 ft-lbf)

NOTICE:
* The "with SST" torque value is effective when using SST with a fulcrum length of 25 mm (0.984 in.) and a torque wrench with a fulcrum length of 180 mm (7.09 in.) Service Precautions.
* The "with SST" torque value is effective when SST is parallel to the torque wrench.

(b) Connect the engine coolant temperature sensor connector.

2. INSTALL INVERTER RESERVE TANK ASSEMBLY Installation

3. INSTALL FUEL INJECTOR ASSEMBLY

Installation