Installation

2ZR-FXE FUEL: FUEL INJECTOR: INSTALLATION

1. INSTALL FUEL INJECTOR ASSEMBLY

(a) Install a new insulator and O-ring to each fuel injector assembly.





Text in Illustration





(b) Apply a light coat of gasoline or spindle oil to the contact surfaces of the new O-ring on each fuel injector assembly.

(c) While turning the fuel injector assembly left and right, install it onto the fuel delivery pipe sub-assembly.





NOTICE:
* Do not damage the fuel injector assembly or O-ring.
* Do not twist the O-ring.
* After installing each fuel injector, check that it turns smoothly. If not, replace the O-ring with a new one.

2. INSTALL NO. 1 DELIVERY PIPE SPACER

(a) Install the 2 No. 1 delivery pipe spacers onto the cylinder head.





Text in Illustration





NOTICE:
Install the No. 1 delivery pipe spacers in the correct direction.

3. INSTALL FUEL DELIVERY PIPE SUB-ASSEMBLY

(a) Install the fuel delivery pipe sub-assembly with the 4 fuel injector assemblies and install the 2 bolts.

Torque : 21 Nm (214 kgf-cm, 15 ft-lbf)

NOTICE:
* Do not drop the fuel injectors when installing the fuel delivery pipe sub-assembly.
* Check that the fuel injector assemblies rotate smoothly after installing the fuel delivery pipe sub-assembly.

(b) Install the bolt to secure the fuel delivery pipe sub-assembly.

Torque : 21 Nm (214 kgf-cm, 15 ft-lbf)

4. CONNECT FUEL TUBE SUB-ASSEMBLY

(a) Push the tube connector into the pipe until the tube connector makes a "click" sound.





NOTICE:
* Before connecting the connector and fuel pipe, check that there is no damage or foreign matter on the connecting part of the fuel pipe.
* After connecting the fuel tube connector and pipe, check that they are securely connected by pulling on them.

(b) Engage the lock claw to install the No. 1 fuel pipe clamp.

5. CONNECT ENGINE WIRE

(a) Install the bolt.

Torque : 8.4 Nm (86 kgf-cm, 74 in-lbf)

(b) Connect the 4 fuel injector connectors.

(c) Connect the 4 connectors.

(d) Attach the 2 clamps to connect the wire harness.

6. INSTALL EGR WITH COOLER PIPE SUB-ASSEMBLY

Installation

7. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

8. INSPECT FOR FUEL LEAK Fuel System

9. INSTALL REAR FLOOR BOARD UPPER NO. 3 PLATE Installation

10. INSTALL DECK FLOOR BOX RH Installation

11. INSTALL REAR NO. 3 FLOOR BOARD Installation

12. INSTALL REAR DECK FLOOR BOX Installation

13. INSTALL REAR NO. 2 FLOOR BOARD Installation