Installation
SUPPLEMENTAL RESTRAINT SYSTEMS: FRONT SEAT CUSHION ASSEMBLY (w/ Occupant Classification ECU, Occupant Classification Sensor): INSTALLATION
1. INSTALL OCCUPANT CLASSIFICATION ECU Installation
2. INSTALL OCCUPANT CLASSIFICATION SENSOR
(a) Install the occupant classification sensor with 2 clips.
NOTICE:
* Securely install the clip.
* Do not reuse an occupant classification sensor which has been dropped.
* Make sure that there is no foreign matter between the occupant classification sensor and seat assembly.
(b) Engage the claw to install the pressure hose.
Text in Illustration
(c) Connect the connector.
NOTICE:
* When setting the pressure hose, make sure the pressure hose is not twisted. 1 full twist or more will damage the pressure hose.
* Make sure the radius of the circular path of the pressure hose is 20 mm (0.787 in.) or more.
* Do not kink the pressure hose.
* After connecting the connectors, make sure that the connectors are not strained or pulled apart.
* Make sure that the pressure hose is not pinched between other components.
3. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD RH
HINT
Use the same procedure for the RH side and LH side Reassembly.
4. INSTALL FRONT POWER SEAT SWITCH RH (w/o Memory)
HINT
Use the same procedure for the RH side and LH side Reassembly.
5. INSTALL POSITION CONTROL ECU AND SWITCH ASSEMBLY RH (w/ Memory)
HINT
Use the same procedure for the RH side and LH side Reassembly.
6. INSTALL FRONT SEAT CUSHION INNER SHIELD RH
HINT
Use the same procedure for the RH side and LH side Reassembly.
7. INSTALL FRONT SEAT CUSHION SHIELD ASSEMBLY RH
HINT
Use the same procedure for the RH side and LH side Reassembly.
8. INSTALL RECLINING ADJUSTER RELEASE HANDLE RH
HINT
Use the same procedure for the RH side and LH side Reassembly.
9. INSTALL RECLINING POWER SEAT SWITCH KNOB RH
HINT
Use the same procedure for the RH side and LH side Reassembly.
10. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB RH
HINT
Use the same procedure for the RH side and LH side Reassembly.
11. INSTALL FRONT SEAT INNER BELT ASSEMBLY RH
HINT
Use the same procedure for the RH side and LH side Reassembly.
12. INSTALL FRONT SEAT ASSEMBLY RH
HINT
Refer to the procedure from Install Front Seat Assembly Installation.
Use the same procedure for the RH side and LH side.
13. PERFORM DIAGNOSTIC SYSTEM CHECK
(a) Perform a diagnostic system check Reading and Clearing Diagnostic Trouble Codes.