Installation
SEAT BELT: OCCUPANT DETECTION SENSOR: INSTALLATION
1. INSTALL OCCUPANT DETECTION SENSOR
(a) Using hog ring pliers, install 14 new hog rings.
NOTICE:
* Be careful not to damage the cover.
* When installing the hog rings, avoid wrinkling the cover.
2. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD
HINT
Use the same procedure described for the LH side Reassembly.
3. INSTALL POSITION CONTROL ECU AND SWITCH ASSEMBLY (w/ Memory)
HINT
Use the same procedure described for the LH side Reassembly.
4. INSTALL FRONT POWER SEAT SWITCH (w/o Memory)
HINT
Use the same procedure described for the LH side Reassembly.
5. INSTALL FRONT SEAT CUSHION INNER SHIELD RH
HINT
Use the same procedure described for the LH side Reassembly.
6. INSTALL FRONT SEAT CUSHION SHIELD ASSEMBLY
HINT
Use the same procedure described for the LH side Reassembly.
7. INSTALL RECLINING ADJUSTER RELEASE HANDLE RH
HINT
Use the same procedure described for the LH side Reassembly.
8. INSTALL RECLINING POWER SEAT SWITCH KNOB
HINT
Use the same procedure described for the LH side Reassembly.
9. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB
HINT
Use the same procedure described for the LH side Reassembly.
10. INSTALL FRONT SEAT INNER BELT ASSEMBLY RH
HINT
Use the same procedure described for the LH side Installation.
11. INSTALL FRONT SEAT ASSEMBLY
HINT
Use the same procedure described for the LH side Installation.
12. INSTALL REAR INNER SEAT TRACK BRACKET COVER RH
HINT
Use the same procedure described for the LH side Installation.
13. INSTALL REAR OUTER SEAT TRACK BRACKET COVER RH
HINT
Use the same procedure described for the LH side Installation.
14. INSTALL FRONT INNER SEAT TRACK BRACKET COVER RH
HINT
Use the same procedure described for the LH side Installation.
15. INSTALL FRONT OUTER SEAT TRACK BRACKET COVER RH
HINT
Use the same procedure described for the LH side Installation.
16. INSTALL FRONT SEAT HEADREST ASSEMBLY
17. PERFORM REGISTRATION Installation
18. ZERO POINT CALIBRATION AND SENSITIVITY CHECK Installation
19. INSPECT FRONT SEAT ASSEMBLY Installation
20. INSPECT SRS WARNING LIGHT Installation