Installation

2GR-FSE ENGINE CONTROL: CAMSHAFT OIL CONTROL VALVE: INSTALLATION

1. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE (for Bank 2 Exhaust Side)

(a) Apply a light coat of engine oil to a new O-ring and install it to the oil control valve.

(b) Install the oil control valve with the bolt.

Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

(e) Connect the wiring harness at the bracket.

2. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE (for Bank 2 Intake Side)

(a) Apply a light coat of engine oil to a new O-ring and install it to the oil control valve.

(b) Install the oil control valve with the bolt.

Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

NOTICE:
Be careful that the O-ring is not cracked or jumped when installing the oil control valve.

(c) Connect the camshaft timing oil control valve connector.

3. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE (for Bank 1 Intake Side)

(a) Apply a light coat of engine oil to a new O-ring and install it to the oil control valve.

(b) Install the oil control valve with the bolt.

Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

NOTICE:
Be careful that the O-ring is not cracked or jumped when installing the oil control valve.

(c) Connect the camshaft timing oil control valve connector.

(d) Install the V-bank cover bracket with the bolt.

Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

4. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE (for Bank 1 Exhaust Side)

(a) Apply a light coat of engine oil to a new O-ring and install it to the oil control valve.

(b) Install the oil control valve with the bolt.

Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

NOTICE:
Be careful that the O-ring is not cracked or jumped when installing the oil control valve.

(c) Connect the camshaft timing oil control valve connector.

5. INSTALL INTAKE AIR SURGE TANK

(a) Install the intake air surge tank Installation.