Removal

PARK ASSIST / MONITORING: ULTRASONIC SENSOR (for Front Side): REMOVAL

1. REMOVE FRONT BUMPER ASSEMBLY

Removal

2. REMOVE NO. 1 ULTRASONIC SENSOR

(a) Disconnect the sensor connector.

(b) Disengage the 2 claws and remove the No. 1 ultrasonic sensor.





HINT
The illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.

(c) Using a screwdriver with its tip wrapped with protective tape, disengage the claw and remove the ultrasonic sensor clip as shown in the illustration.





Text in Illustration





HINT
The illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.

3. REMOVE NO. 3 ULTRASONIC SENSOR RETAINER

(a) Disengage the 4 claws and remove the No. 3 ultrasonic sensor retainer from the front bumper assembly.





HINT
The illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.