Removal

2UR-GSE ENGINE MECHANICAL: DRIVE BELT: REMOVAL

1. REMOVE COOL AIR INTAKE DUCT SEAL Removal

2. REMOVE NO. 1 AIR CLEANER INLET Removal

3. SEPARATE RADIATOR RESERVE TANK ASSEMBLY

(a) Remove the 2 bolts and separate the radiator reserve tank assembly.

4. REMOVE V-RIBBED BELT

(a) Rotate the V-ribbed belt tensioner pulley counterclockwise to loosen the V-ribbed belt tensioner.

HINT
The pulley bolt for the V-ribbed belt tensioner is reverse threaded.

(b) While turning the V-ribbed belt tensioner counterclockwise, align the holes. Insert a bar of dia5 mm (0.197 in.) into the holes to secure the V-ribbed belt tensioner in place.