Installation

SUPPLEMENTAL RESTRAINT SYSTEMS: FRONT SEAT CUSHION ASSEMBLY (w/ Occupant Classification ECU, Occupant Classification Sensor): INSTALLATION

1. INSTALL OCCUPANT CLASSIFICATION ECU Installation

2. INSTALL OCCUPANT CLASSIFICATION SENSOR

(a) Install the occupant classification sensor with 2 new clips.





NOTICE:
* Do not reuse the clip.
* Securely install the clip.
* Do not reuse an occupant classification sensor which has been dropped.
* Make sure that there is no foreign matter between the occupant classification sensor and seat assembly.

(b) Connect the connector and install the clamp.





NOTICE:
* Make sure the gel mat hose is closer to the floor than the main harness.
* When setting the hose, make sure the hose is not twisted. 1 full twist or more will damage the hose.
* Make sure the radius of the circular path of the hose is 20 mm (0.787 in.) or more.
* Do not bend the pressure hose.
* After connecting the connectors, make sure that the connectors are not strained or pulled apart.
* Make sure that the pressure hose is not pinched between other components.

3. INSTALL FRONT SEAT CUSHION COVER WITH PAD RH Reassembly

4. INSTALL POWER SEAT SWITCH RH

HINT
Use the same procedure for the RH side and the LH side Reassembly.

5. INSTALL FRONT SEAT CUSHION INNER SHIELD RH

HINT
Use the same procedure for the RH side and the LH side Reassembly.

6. INSTALL FRONT SEAT CUSHION SHIELD ASSEMBLY RH

HINT
Use the same procedure for the RH side and the LH side Reassembly.

7. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB RH

HINT
Use the same procedure for the RH side and the LH side Reassembly.

8. INSTALL RECLINING POWER SEAT SWITCH KNOB RH

HINT
Use the same procedure for the RH side and the LH side Reassembly.

9. INSTALL FRONT SEAT INNER BELT ASSEMBLY RH

HINT
Use the same procedure for the RH side and the LH side Installation.

10. INSTALL FRONT SEAT ASSEMBLY RH

HINT
Use the same procedure for the RH side and the LH side Installation.

11. INSTALL REAR INNER SEAT TRACK BRACKET COVER RH

HINT
Use the same procedure for the RH side and the LH side Installation.

12. INSTALL REAR OUTER SEAT TRACK BRACKET COVER RH

HINT
Use the same procedure for the RH side and the LH side Installation.

13. INSTALL FRONT INNER SEAT TRACK BRACKET COVER RH

HINT
Use the same procedure for the RH side and the LH side Installation.

14. INSTALL FRONT OUTER SEAT TRACK BRACKET COVER RH

HINT
Use the same procedure for the RH side and the LH side Installation.

15. INSTALL FRONT SEAT HEADREST ASSEMBLY RH

16. PERFORM REGISTRATION

(a) If the occupant classification ECU has been replaced, perform registration Registration.

17. ZERO POINT CALIBRATION AND SENSITIVITY CHECK

(a) If the occupant classification ECU has been replaced, perform zero point calibration and sensitivity check Initialization.

18. INSPECT SRS WARNING LIGHT

(a) Inspect the SRS warning light Diagnosis System.

19. INSPECT FRONT SEAT ASSEMBLY Installation