Test U
PINPOINT TEST U: THE WASH AND WIPE FUNCTIONS ARE INOPERATIVETest U1-U2:
Test U3:
Normal Operation
The wash/wipe function is activated when the wiper motor module (internal) receives a reference signal through circuit 8-KA7 (WH/VT). When the multifunction switch wash button is pressed for longer than 0.25 seconds, the wiper motor cycles, sending battery voltage through circuit 75S-KA7 (YE/VT) to the washer pump motor. When the wash button is pressed for less than 0.25 seconds the wiper motor will cycle only once, which is considered the mist position.
Possible Causes
- circuit 31-KA19 (BK/RD) open
- circuit 8-KA7 (WH/VT) open
- circuit 31-KA7 (BK) open or short to ground
- multifunction switch
- washer pump relay
- washer pump motor