Ignition Control Module: Testing and Inspection

IGNITION CONTROL MODULE INSPECTION
1. Measure the voltage of the Electronic Control Module (ECM) terminal as follows.
- 2F (Ignition control module)

ECM Pinout Part 1 Of 4:

ECM Pinout Part 1 Of 4

ECM Pinout Part 2 Of 4:

ECM Pinout Part 2 Of 4

ECM Pinout Part 3 Of 4:

ECM Pinout Part 3 Of 4

ECM Pinout Part 4 Of 4:

ECM Pinout Part 4 Of 4

2. Check the condition of the connector, distributor, ignition coil, and high-tension leads.
3. If all are normal but misfire still occurs, replace the distributor.