LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> RX8 2RTR-1.3L >> Repair and Diagnosis >> Accessories and Optional Equipment >> Antitheft and Alarm Systems >> Service and Repair >> Removal and Replacement

Removal and Replacement

COIL REMOVAL/INSTALLATION

NOTE: The coil should not be removed unless it is being replaced.

1. Disconnect the negative battery cable.
2. Remove the column cover.




3. Disconnect the coil connector.
4. Detach the steering lock tab from hole on the coil.
5. Detach the coil tab from the steering lock and remove the coil.
6. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals