Carpet: Service and Repair

FLOOR COVERING REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Remove the following parts:
a. Front seats Removal and Replacement

b. Rear seat cushion Rear Seat Cushion Removal/Installation

c. Audio amplifier (Vehicles with Bose(R) system) Service and Repair

d. Front scuff plates Front Scuff Plate Removal/Installation

e. Rear scuff plates Rear Scuff Plate Removal/Installation

f. Front side trims Front Side Trim Removal/Installation

g. Steering shaft cover Steering Wheel And Column Removal/Installation [Without Advanced Keyless Entry And Push Button Start System] Steering Wheel And Column Removal/Installation [With Advanced Keyless Entry And Push Button Start System]

h. Rear side seat back Rear Side Seat Back Removal/Installation

i. Upper panel Upper Panel Removal/Installation

j. Decoration panel Decoration Panel Removal/Installation

k. Shift knob (MTX) Locations

l. Shift panel Shift Panel Removal/Installation

m. Center panel lower Center Panel Lower Removal/Installation

n. Rear console Rear Console Removal/Installation

o. B-pillar lower trims B-Pillar Lower Trim Removal/Installation

p. Fuel-filler lid opener bezel Fuel-Filler Lid Opener Bezel Removal/Installation

q. Lower anchor of the front seat belt installation bolts Front Seat Belt Removal/Installation

3. Remove the fasteners A and B.






4. Remove the flange cap nuts C and harness clips D.






5. Take the floor covering off from the front passenger-side door opening.

6. Install in the reverse order of removal.